November 5, 2024

Saturdays with Shandy: Christmas Edition! Distressed Wooden Sign

It’s beginning to look a lot like Christmas! If you joined us during our last six weeks, your house is sparkling clean and organized! The hard work is behind us; now it’s time to have fun! For the next five weeks, we will meet here every Saturday for tutorials on homemade Christmas gifts, crafts, and decorating! Turn up the Christmas music, and let’s get started!

This week, we are making distressed wooden signs. I’ve been making signs for years, and they are wildly popular! You can make them in any size and color you want, and with any name or quote you’d like! The versatility makes them not only beautiful decor, but wonderful gifts as well… and inexpensive, too!

Materials:

  • wood (reclaimed wood, pallets, or pre-cut wood from a home improvement store)
  • base color paint (color of your choice) I used a barn red acrylic paint from the craft store. Only $1.19, yay!
  • lettering paint (color of your choice) I used black acrylic paint from the craft store.
  • paint brush
  • stencil sponge (spouncer)
  • paper plates
  • letter stencils
  • fine grit sandpaper
  • sawtooth picture hangers (1 or 2 depending on size of sign. Nails are included.)
  • hammer
  • hair dryer
  • newspaper or paper bags

Instructions:

  1. Put your piece of wood on top of newspaper to protect your table. Make sure it is free of dust and DRY. If it’s too rough, you will need to sand it down a bit, and then wipe away the dust.
  2. Shake your base color paint and squirt a good amount on a paper plate (you may want to double up the plates.)
  3. Using a dry paint brush, paint the top and sides of the sign. The key is thin layers! You don’t want drips or dollops.
  4. Allow to dry. I’m impatient, so I use a hairdryer on low to dry the paint. It only takes a minute or two this way.
  5. Paint a second thin coat on the sign, and dry.
  6. Lay out your stencils… planning is important! You don’t want to run out of room with a letter or two to go! For this reason, it’s good to know what you want your sign to say BEFORE you buy your wood.
  7. Shake your lettering paint and squirt a small amount on a new paper plate.
  8. Press your spouncer in the paint, then press it down on a clean part of the plate. Again, you don’t want to put too much paint on your sign, and you don’t want your paint to seep under the stencil.
  9. Place your stencil on the wood, and holding it perfectly still, in an up and down motion, use your spouncer to paint each letter. You will need to use the hair dryer to dry each letter before moving on to the next one, and when removing your stencil from the wet paint, carefully lift it UP. Do not slide it off.
  10. Continue stenciling your letters until your name or phrase is complete.
  11. When the sign is completely dry, take the fine grit sandpaper to distress the sign, especially the edges and at random spots on the front of the sign. The goal is to make it look aged and the letters somewhat faded.
  12. Using a soft cloth, remove any trace of dust from the sign, then nail the picture hangers onto the back of the sign… either one in the middle, or one on each end. Your sign is now ready to hang, or to give away as a gift!

*Not for outdoor use.

Love and Blessings,

Shandy

You can visit Shandy’s personal blog at Aprons-n-Pearls.blogspot.com

Saturdays with Shauna: Knitting!

Now that the weather is getting cooler here in Middle Tennessee, there’s nothing more relaxing to me than curling up under my favorite blanket with a steaming cup of hot chocolate next to me and a quick knitting project in my hands!  I discovered a love for knitting several years ago.  For me, it is calming and I get a sense of accomplishment when I can finish a quick project in a few hours’ time.

One of my favorite projects is a simple knit hat, which can be finished in one sitting if you have a few hours to spare.  Even if you don’t know how to knit, this is a great starter project and I’ve posted links along the way to help you learn!  A great resource for learning the basics is knittinghelp.com. There you can find free videos that show you how to do everything from cast on, knit, purl, cast off and everything in between.  So if you don’t understand something, search for a video on knittinghelp.com or check their message boards.

Now, let’s get started! 🙂

 Simple Knit Hat (adult size)

 

This is me sporting one of these hats I made last fall

 You will need: 

Size 13 knitting needles – 16” circular 

Size 13 double pointed knitting needles (set of 5)

One skein of Lion Brand “Hometown USA” Super Bulky yarn (weight 6) in your choice of color (or about 5 oz/81 yards of any other super bulky weight yarn of your choice, I just prefer to use Hometown USA because it’s inexpensive – $2.79/per skein on amazon.com — and comes in a variety of great colors for fall)

A large-eyed tapestry needle

A stitch marker 

A tape measure

To start, cast on 48 stitches using the circular needles.  If you are unsure how to cast on, see this video:  http://www.knittinghelp.com/video/play/long-tail-cast-on

Row 1:  Knit and join together, being careful not to twist.  Knit the entire row, marking the beginning of the row with a stitch marker.  To see how to join and make sure not to twist, see this video:  http://www.knittinghelp.com/video/play/circular-needle

And to learn the “knit” stitch:  http://www.knittinghelp.com/video/play/the-knit-stitch-english-english  And here is some information on using stitch markers:  http://www.knittinghelp.com/forum/showthread.php?t=99967

Knit every row until your work measures 8” long.

After you’ve got 8” knitted, you’re going to K2tog (knit two together) all the way across the next row.  Here is a video on how to K2tog:  http://www.knittinghelp.com/video/play/knit-2-together-english

Knit the next row.

Switch your work to the double pointed needles.  At this point, you should have 24 stitches, so just slip each stitch onto a double pointed needle – 6 stitches on each of the 4 needles.  Use the 5th needle in the set to work with.  Here is a video about working on double pointed needles (DPNs):  http://www.knittinghelp.com/video/play/double-pointed-needles

K2tog across the next row.

Knit the next row.

Now you’re ready to finish!  Cut your yarn and leave a 6” tail.  Thread this into your large-eyed tapestry needle and carefully transfer the remaining stitches off of the DPNs and thread your needle through them.  Pull the yarn tightly to gather the top of the hat.  Then stick your needle through to the inside of the hat and turn the hat inside out so you can weave in the end of the yarn on the inside where it won’t be seen.  Here is a post that talks about weaving in ends:  http://www.knittinghelp.com/forum/showthread.php?t=109276

Basically, you’re just going to work the yarn tail through a few stitches inside the hat (make sure you’re not going all the way through!  You don’t want to be able to see it on the right side of the hat) so that it doesn’t unravel.  After you feel like it’s tucked in there good and won’t come out, you can cut off any remaining length of your tail.

Guess what?  You’re DONE!  And you have a cute hat that you made to show off to all your friends!  It was fast and inexpensive too!  You could whip out a few of these for Christmas presents and bless everyone you know!  And as you learn more about knitting, you can add your own variations such as stripes in different colors or incorporating the purl stitch to make your hat look different.  I’d love to see your hats and hear about your projects, so please leave a comment below!  I hope you enjoy making many hats in the future and if you’re new to knitting, I hope this tutorial has sparked your interest in the craft!  Happy Knitting!

<3 Shauna

You can visit Shauna Jared’s personal blog, Work Home Play, for more crafts, DIY projects, and recipes!

Saturday’s with Shauna Jared

This blog is brought to you today by Shauna Jared

I am so excited that I was asked to do the Saturday craft/fun blog for the Singles Ministry here at GCH!  I love all things crafty, although it’s hard for me to find time to actually do them… but recently I’ve discovered a new craft obsession that’s relatively easy and inexpensive as well as relaxing, so I thought I would share it with you guys!  Hand embroidery! 

 

Now, I know what you’re thinking.  Embroidery?  You mean dishtowels with animated vegetables and teacups on them?  Puppies doing laundry and washing dishes?  Well, you certainly can embroider those patterns if you would like (I’ve found TONS of free vintage embroidery patterns online… see the links later in this post) and I actually find some of those old patterns quite charming!  As the Bible says in Revelation 21:5, “Behold, I make all things new.” 😉  But there are plenty of modern embroidery patterns out there and you can make anything from tea towels to quilts to embroidering on clothing and tote bags!  And embroidered items can make fantastic gifts!  (Christmas is only 79 days away, ladies…. )

 

So, let’s get started, shall we?

 

I’m currently working on a tea towel with some funky flowers on them (see photo above), so I’ll tell you what you’ll need for this project and where to get patterns and how to get them on your tea towel (or pillowcase or whatever your project is going to be!)

 

Basic tools you will need:

 

Embroidery pattern ( this is a link to Aunt Martha’s, but there are plenty of other options.  The one I’m using is “Fantasy Flowers” found at sublimestitching.com)  

Embroidery needles 

Embroidery hoop (5” – 7”) 

Embroidery floss (how many and colors will depend on your particular project) 

Blank Tea Towel (or pillowcase, tote bag, shirt, quilt piece, baby bib, whatever… you get the picture.  A “blank” just means an item that has no design on it – it is awaiting your brilliant embroidery masterpiece)

An iron and ironing board… I think most everyone already has these 😉

 

And depending on what type of pattern you have, you may need the following:

 

Vellum tracing paper 

Iron-on transfer pen

 

 

First, let’s talk about the pattern.  You can buy iron on transfer patterns and all you will do is simply follow the instructions on the package and iron it on to your blank.  Simple!  You can find the “Aunt Martha’s” brand of iron on transfers at Wal-Mart or JoAnn’s and these are usually the vintage type patterns.  I’ve also found a couple of awesome websites that offer iron on patterns for purchase:

 

Pattern Bee:  http://patternbee.com/MENU.html

Sublime Stitching:  http://www.sublimestitching.com/ (the pattern I’m currently using in the photo at the beginning of this post is “Fantasy Flowers”… they also sell everything else you would need for embroidery in their shop!  Even beginners kits!

 

You can also find patterns online (some free, some purchased PDF’s) to print at home.  You would then need some vellum tracing paper and an iron-on transfer pen in order to get the design onto your blank.  I’ve found many websites that offer free vintage embroidery patterns, so you would need the tracing paper and transfer pen to use these.  You would simply print your pattern out, then place a piece of tracing paper over it.  It is thin, so you can see the pattern underneath.  Use your iron-on transfer pen to trace the design onto the paper.  Then follow the instructions that come with the pen and iron it on to your blank.  Easy peasy!  (NOTE:  If there is lettering, make sure you are tracing it BACKWARDS so that the words show up correctly on your blank when you iron it on!  Let’s not talk about how I found this out…)

 

Here are some resources I’ve found for free patterns:

 

Pattern Bee:  http://patternbee.com/MENU.html (offers some freebies)

Vintage Transfer Finds:  http://mytransfers.blogspot.com/

French-Knots: http://www.french-knots.com/

nanaCompany: http://nanacompany.typepad.com/nanacompany/ (beautiful blog and they offer some freebies)

 

I’m sure there are other ways to get your pattern on to your blank, but these are the two best ways, in my opinion 

 

Now that you have your pattern on your blank, you’re ready to go!  

 

Next, you need to put the hoop on your project to help you make even stitches and keep even tension.  Take the hoop apart and put the piece that isn’t adjustable underneath your fabric.  Your whole project doesn’t have to fit inside the hoop, you can move it around when you need to work on another part.  Now put the piece that has the adjustable screw on it on top of your fabric, over the other hoop, and push down until they go together.  Then you will need to tug at the fabric all the way around the hoop edge to make sure it’s good and tight.  And tighten up the screw if you need to.  Be sure to remove the hoop from your project when you’re not working on it for an extended period of time.  You don’t want it to get “hoop burn”!

 

Now, thread your embroidery needle with some floss and make a knot at the end… then we’ll take a look at a basic embroidery stitch!

 

The Back Stitch

 

 

So easy!  This is the stitch I’m using in the photo at the top of this post. Simply bring your needle from the back of your work, up through at “1”, back down at “2”, then back up again in front of “1” at “3”.  Then you would go back down at “4” and so forth.

 

There are other stitches you can do to get different effects, such as the stem stitch, satin stitch, split stitch, and French knot.  If the pattern you choose requires one or more of these stitches, it should give you a tutorial in the instructions.  If not, you can Google the stitch to find instructions or even find video tutorials on YouTube 

 

So that should be enough to get you on your way!  Are you addicted yet?  I certainly am.  I can’t wait to see your projects and hear about your new found love of embroidery, so please make sure to share in the comments below!  Praise God for embroidery!  Have a blessed day! 

 

<3 Shauna